Comparative Analysis of Fuzzy Membership Functions for Step and Smooth Input Tracking in a 3-Axis Robotic Manipulator
DOI:
https://doi.org/10.59247/jfsc.v3i1.278Keywords:
Fuzzy Logic Control, Robotic Manipulator, Membership Functions, Step Input TrackingAbstract
Robotic manipulators are essential in industrial and medical applications, requiring precise control to improve efficiency and reduce errors. This research looks at how well fuzzy logic controllers using Gaussian, generalized bell, triangular, and trapezoidal membership functions can handle step and smooth inputs for a robot system that is meant to move materials. Critical metrics like steady-state values, overshoot, rise time, integral absolute error (IAE), and root mean square error (RMSE) were tested using five different methods. The results showed that both the Gaussian and extended bell functions found a good balance between being stable and being responsive. This made them useful for situations with moderate to high input levels. While triangular functions displayed enhanced responsiveness, they also revealed heightened overshoot. In contrast, trapezoidal functions demonstrated significant stability at high saturation levels, although they had challenges in attaining smooth transitions. These findings highlight the necessity of choosing membership functions according to particular application needs. This study investigates the utilization of hybrid methodologies and adaptive optimization strategies to improve fuzzy control systems. These concepts offer compelling approaches to improve accuracy and resilience in dynamic robotic settings.
References
E. S. Ghith and F. A. A. Tolba, “Design and optimization of PID controller using various algorithms for micro-robotics system,” Journal of Robotics and Control (JRC), vol. 3, no. 3, pp. 244-256, 2022, https://doi.org/10.18196/jrc.v3i3.14827.
A. K. Hado, B. S. Bashar, M. M. A. Zahra, R. Alayi, Y. Ebazadeh, and I. Suwarno, “Investigating and optimizing the operation of microgrids with intelligent algorithms,” Journal of Robotics and Control (JRC), vol. 3, no. 3, pp. 279-288, 2022, https://doi.org/10.18196/jrc.v3i3.14772.
E. H. Kadhim and A. T. Abdulsadda, “Mini drone linear and nonlinear controller system design and analyzing,” Journal of Robotics and Control (JRC), vol. 3, no. 2, pp. 212-218, 2022, https://doi.org/10.18196/jrc.v3i2.14180.
T.-D. Huynh, N.-T. Bach, Q.-D. Le, D.-D. Le, V.-H. Bui, H.-A. Vo, V.-N.-L. Nguyen, P.-H. Pham, H.-D. Nguyen, and V.-D.-H. Nguyen, “Implementation of Fuzzy-PID Controller for 2-DOF Helicopter,” Journal of Fuzzy Systems and Control, vol. 2, no. 2, pp. 74-80, 2024, https://doi.org/10.59247/jfsc.v2i2.204.
X. Li, J. Liu, L. Wang, K. Wang, and Y. Li, “Welding process tracking control based on multiple model iterative learning control,” Mathematical Problems in Engineering, vol. 2019, 2019, https://doi.org/10.1155/2019/6137352.
M. A. Hadj-Abdelkader, G. Bourhis, and B. Cherki, “Haptic feedback control of a smart wheelchair,” Applied Bionics and Biomechanics, vol. 9, no. 2, pp. 181-192, 2012, https://doi.org/10.1155/2012/921982.
D. Kumar, R. Malhotra, and S. R. Sharma, “Design and construction of a smart wheelchair,” Procedia Computer Science, vol. 172, pp. 302-307, 2020, https://doi.org/10.1016/j.procs.2020.05.048.
A. Sharmila, A. Saini, S. Choudhary, T. Yuvaraja, and S. G. Rahul, “Solar Powered Multi-Controlled Smart Wheelchair for Disabled: Development and Features,” Journal of Computational and Theoretical Nanoscience, vol. 16, no. 11, pp. 4889-4900, 2019, https://doi.org/10.1166/jctn.2019.8401.
K. Sukerkar, D. Suratwala, A. Saravade, J. Patil, and R. D’britto, “Smart wheelchair: a literature review,” Mental Retardation, vol. 5, no. 5. 4, pp. 5-6, 2018, https://doi.org/10.11591/ijict.v7i2.pp63-66.
K. Permana, S. K. Wijaya, and P. Prajitno, “Controlled wheelchair based on brain computer interface using Neurosky Mindwave Mobile 2,” In AIP Conference Proceedings, vol. 2168, no. 1, 2019, https://doi.org/10.1063/1.5132449.
K. Rahimunnisa, M. Atchaiya, B. Arunachalam, and V. Divyaa, “AI-based smart and intelligent wheelchair,” Journal of applied research and technology, vol. 18, no. 6, pp. 362-367, 2020, https://doi.org/10.22201/icat.24486736e.2020.18.6.1351.
M. R. Islam, M. R. T. Hossain, and S. C. Banik, “Synchronizing of stabilizing platform mounted on a two-wheeled robot,” Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 552-558, 2021, https://doi.org/10.18196/jrc.26136.
C. Iwendi, M. A. Alqarni, J. H. Anajemba, A. S. Alfakeeh, Z. Zhang, and A. K. Bashir, “Robust navigational control of a two-wheeled self-balancing robot in a sensed environment,” IEEE Access, vol. 7, pp. 82337-82348, 2019, https://doi.org/10.1109/ACCESS.2019.2923916.
F. A. Raheem, B. F. Midhat, and H. S. Mohammed, “PID and fuzzy logic controller design for balancing robot stabilization,” Iraqi Journal of Computers, Communications, Control and Systems Engineering, vol. 18, no. 1, pp. 1-10, 2018, https://doi.org/10.33103/uot.ijccce.18.1.1.
L. Guo, S. A. A. Rizvi, and Z. Lin, “Optimal control of a two-wheeled self-balancing robot by reinforcement learning,” International Journal of Robust and Nonlinear Control, vol. 31, no. 6, pp. 1885-1904, 2021, https://doi.org/10.1002/rnc.5058.
I. Gandarilla, V. Santibañez, and J. Sandoval, “Control of a self-balancing robot with two degrees of freedom via IDA-PBC,” ISA transactions, vol. 88, pp. 102-112, 2019, https://doi.org/10.1016/j.isatra.2018.12.014.
Y. Su, T. Wang, K. Zhang, C. Yao, and Z. Wang, “Adaptive nonlinear control algorithm for a self-balancing robot,” IEEE Access, vol. 8, pp. 3751-3760, 2019, https://doi.org/10.1109/ACCESS.2019.2963110.
T. Terakawa, M. Komori, K. Matsuda, and S. Mikami, “A Novel Omnidirectional Mobile Robot with Wheels Connected by Passive Sliding Joints,” IEEE/ASME Trans. Mechatronics, vol. 23, no. 4, pp. 1716-1727, 2018, https://doi.org/10.1109/TMECH.2018.2842259.
P. Shen, X. Zhang, and Y. Fang, “Complete and Time-Optimal PathConstrained Trajectory Planning with Torque and Velocity Constraints: Theory and Applications,” IEEE/ASME Trans. Mechatronics, vol. 23, no. 2, pp. 735-746, Apr. 2018, https://doi.org/10.1109/TMECH.2018.2810828.
M. A. Al Mamun, M. T. Nasir, and A. Khayyat, “Embedded System for Motion Control of an Omnidirectional Mobile Robot,” IEEE Access, vol. 6, no. 8, pp. 86722-6739, 2018, https://doi.org/10.1109/ACCESS.2018.2794441.
M. Ferro, A. Paolillo, A. Cherubini, and M. Vendittelli, “VisionBased Navigation of Omnidirectional Mobile Robots,” IEEE Robot. Autom. Lett., vol. 4, no. 3, pp. 2691-2698, 2019, https://doi.org/10.1109/LRA.2019.2913077.
B. A. Gebre and K. V. Pochiraju, “Machine Learning Aided Design and Analysis of a Novel Magnetically Coupled Ball Drive,” IEEE/ASME Trans. Mechatronics, vol. 24, no. 5, pp. 1942-1953, 2019, https://doi.org/10.1109/TMECH.2019.2929956.
H. Maghfiroh, J. Slamet Saputro, F. Fahmizal, and M. Ahmad Baballe, “Adaptive Fuzzy-PI for Induction Motor Speed Control,” Journal of Fuzzy Systems and Control, vol. 1, no. 1, pp. 1-5, 2023, https://doi.org/10.59247/jfsc.v1i1.24.
A. Ma'arif and A. Çakan, “Simulation and arduino hardware implementation of dc motor control using sliding mode controller,” Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 582-587, https://doi.org/10.18196/jrc.26140.
A. Ma'arif and N. R. Setiawan, “Control of DC motor using integral state feedback and comparison with PID: simulation and Arduino implementation,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 456-461, 2021, https://doi.org/10.18196/jrc.25122.
B. Hekimoğlu, “Optimal Tuning of Fractional Order PID Controller for DC Motor Speed Control via Chaotic Atom Search Optimization Algorithm,” IEEE Access, vol. 7, pp. 38100-38114, 2019, https://doi.org/10.1109/ACCESS.2019.2905961.
A. Latif, A. Z. Arfianto, H. A. Widodo, R. Rahim, and E. T. Helmy, “Motor DC PID System Regulator for Mini Conveyor Drive Based on MATLAB,” Journal of Robotics and Control (JRC), vol. 1, no. 6, pp. 185-190, 2020, https://doi.org/10.18196/jrc.1636.
H. Maghfiroh, A. Ramelan, and F. Adriyanto, “Fuzzy-PID in BLDC motor speed control using MATLAB/Simulink,” Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 8-13, 2022, https://doi.org/10.18196/jrc.v3i1.10964.
S. Gobinath and M. Madheswaran, “Deep Perceptron Neural Network with Fuzzy PID Controller for Speed Control and Stability Analysis of BLDC Motor,” Soft Computing, vol. 24, no. 13, pp. 10161-10180, 2020, https://doi.org/10.1007/s00500-019-04532-z.
K. Vanchinathan and N. Selvaganesan, “Adaptive Fractional Order PID Controller Tuning for Brushless DC Motor Using Artificial Bee Colony Algorithm,” Results in Control and Optimization, vol. 4, 2021, https://doi.org/10.1016/j.rico.2021.100032.
P. Dutta and S. K. Nayak, “Grey Wolf Optimizer Based PID Controller for Speed Control of BLDC Motor,” Journal of Electrical Engineering & Technology, vol. 16, no. 2, pp. 955-961, 2021, https://doi.org/10.1007/s42835-021-00660-5.
A. Chatterjee, “Analysis of a Self-excited Induction Generator with Fuzzy PI Controller for Supporting Domestic Loads in a Microgrid,” Journal of Fuzzy Systems and Control, vol. 1, no. 2, pp. 61-65, 2023, https://doi.org/10.59247/jfsc.v1i2.42.
S.K. Mallempati, G. Satheesh, and S. Peddakotla, “Design of optimal PI controller for torque ripple minimization of SVPWM-DTC of BLDC motor,” International Journal of Power Electronics and Drive Systems, vol. 14, no. 1, pp. 283, 2023, https://doi.org/10.11591/ijpeds.v14.i1.pp283-293.
R. P. Borase, D. K. Maghade, S. Y. Sondkar, and S. N. Pawar, “A review of PID control, tuning methods and applications,” International Journal of Dynamics and Control, vol. 9, no. 2, pp. 818-827, 2021, https://doi.org/10.1007/s40435-020-00665-4.
C. T. Chao, N. Sutarna, J. S. Chiou, and C. J. Wang, “An optimal fuzzy PID controller design based on conventional PID control and nonlinear factors,” Applied Sciences, vol. 9, no. 6, pp. 1224, 2019, https://doi.org/10.3390/app9061224.
D. Somwanshi, M. Bundele, G. Kumar, and G. Parashar, “Comparison of Fuzzy-PID and PID Controller for Speed Control of DC Motor Using LabVIEW,” In Procedia Computer Science, vol. 152, pp. 252-260, 2019, https://doi.org/10.1016/j.procs.2019.05.019.
S. J. Hammoodi, K. S. Flayyih, and A. R. Hamad, “Design and Implementation of Speed Control System for DC Motor Based on PID Control and Matlab Simulink,” International Journal of Power Electronics and Drive Systems, vol. 11, no. 1, pp. 127, 2020, https://doi.org/10.11591/ijpeds.v11.i1.pp127-134.
V. V. Patel, “Ziegler-Nichols Tuning Method,” Resonance, vol. 25, pp. 1385-1397, 2020, https://doi.org/10.1007/s12045-020-1058-z.
J. Chen, D. Ma, Y. Xu, and J. Chen, "Delay robustness of PID control of second-order systems: Pseudoconcavity, exact delay margin, and performance tradeoff," IEEE Transactions on Automatic Control, vol. 67, no. 3, pp. 1194-1209, 2021, https://doi.org/10.1109/TAC.2021.3059155.
R. Chotikunnan, P. Chotikunnan, P. Imura, Y. Pititheeraphab, and N. Thongpance, “The Utilization of Fuzzy Logic Controllers in Steering Control Systems for Electric Ambulance Golf Carts,” International Journal of Robotics and Control Systems, vol. 4, no. 1, pp. 427-444, 2024, https://doi.org/10.31763/ijrcs.v4i1.1333.
H. N. Binh, D. T. Dinh, and A. D. Cong, “Optimization of Linear Quadratic Regulator for Reaction Wheel Inverted Pendulum using Particle Swarm Optimization: Simulation and Experiment,” Journal of Fuzzy Systems and Control, vol. 3, no. 1, pp. 7-15, 2024, https://doi.org/10.59247/jfsc.v3i1.271.
M.-D. Tran, D.-T.-D. Le, H.-P. Phan, H.-V. Vo, D.-Q.-T. Ngo, N.-D. Nguyen, T.-P. Nguyen, N.-L. Tran, T.-A. Vo, and T.-T.-H. Le, “Analysis of Linear and Intelligent Control for Balancing Pendubot System,” Journal of Fuzzy Systems and Control, vol. 3, no. 1, pp. 16-21, 2024, https://doi.org/10.59247/jfsc.v3i1.272.
P. Chotikunnan, B. Panomruttanarug, N. Thongpance, M. Sangworasil, and T. Matsuura, “An application of Fuzzy Logic Reinforcement Iterative Learning Control to Balance a Wheelchair,” International Journal of Applied Biomedical Engineering, vol. 10, no. 2, pp. 1-9, 2017, https://doi.org/10.1109/BMEiCON.2017.8229165.
M. Kiew-ong-art, P. Chotikunnan, A. Wongkamhang, R. Chotikunnan, A. Nirapai, P. Imura, M. Sangworasil, N. Thongpance, and A. Srisiriwat, “Comparative Study of Takagi-Sugeno-Kang and Madani Algorithms in Type-1 and Interval Type-2 Fuzzy Control for Self-Balancing Wheelchairs,” International Journal of Robotics and Control Systems, vol. 3, no. 4, pp. 643-657, 2023, https://doi.org/10.31763/ijrcs.v3i4.1154.
P. Chotikunnan, W. Khotakham, A. Wongkamhang, A. Nirapai, P. Imura, K. Roongpraser, R. Chotikunnan, and N. Thongpance, “Genetic Algorithm-Optimized LQR for Enhanced Stability in Self-Balancing Wheelchair Systems,” Control Systems and Optimization Letters, vol. 2, no. 3, pp. 327-335, 2024, https://doi.org/10.59247/csol.v2i3.161.
P. Chotikunnan, W. Khotakham, A. Ma'arif, A. Nirapaia, K. Javana, P. Pisa, P. Thajai, S. Keawkao, K. Roongprasert, R. Chotikunnan, P. Imura, and N. Thongpance, “Comparative Analysis of Sensor Fusion for Angle Estimation Using Kalman and Complementary Filters,” International Journal of Robotics and Control Systems, vol. 5, no. 1, pp. 1-21, 2024, https://doi.org/10.31763/ijrcs.v5i1.1674.
V. Dubey, “Comparative Analysis of PID Tuning Techniques for Blood Glucose Level of Diabetic Patient,” Turkish Journal of Computer and Mathematics Education (TURCOMAT), vol. 12, no. 11, pp. 2948-2953, 2021, https://doi.org/10.17762/turcomat.v12i2.2334.
A. O. Amole, O. E. Olabode, D. O. Akinyele, and S. G. Akinjobi, “Optimal Temperature Control Scheme for Milk Pasteurization Process Using Different Tuning Techniques for a Proportional Integral Derivative Controller,” Iranian Journal of Electrical and Electronic Engineering, vol. 2170, pp. 2170-2170, 2022, https://doi.org/10.22068/IJEEE.18.3.2170.
S. Mahfoud, A. Derouich, N. El Ouanjli, M. El Mahfoud, and M. Taoussi, “A New Strategy-Based PID Controller Optimized by Genetic Algorithm for DTC of the Doubly Fed Induction Motor,” Systems, vol. 9, no. 2, p. 37, 2021, https://doi.org/10.3390/systems9020037.
N. Jamali, M. R. Gharib, and B. O. Koma, “Neuro-Fuzzy Decision Support System for Optimization of the Indoor Air Quality in Operation Rooms,” International Journal of Robotics and Control Systems, vol. 3, no. 1, pp. 98-106, 2023, https://doi.org/10.31763/ijrcs.v3i1.854.
H.-T. Nguyen, A.-Q. Dao, V.-P.-Q. Hoang, Q.-A. Nguyen, T.-P. Dang, M.-N. Tang, V.-H. Le, T.-N.-V. Bui, T.-D. Nguyen, and T.-H.-L. Le, “Experiment Ball Levitation with Fuzzy PID and PID Implementation,” Journal of Fuzzy Systems and Control, vol. 2, no. 3, pp. 129-134, 2024, https://doi.org/10.59247/jfsc.v2i3.221.
A. Shuraiji and S. Shneen, “Fuzzy Logic Control and PID Controller for Brushless Permanent Magnetic Direct Current Motor: A Comparative Study,” Journal of Robotics and Control (JRC), vol. 3, no. 6, pp. 762-768, 2022, https://doi.org/10.18196/jrc.v3i6.15974.
J. Zhou and Q. Zhang, “Adaptive fuzzy control of uncertain robotic manipulator,” Mathematical Problems in Engineering, vol. 2018, https://doi.org/10.1155/2018/4703492.
Z. A. Al-Dabbagh, S. W. Shneen, and A. O. Hanfesh, “Fuzzy Logic-based PI Controller with PWM for Buck-Boost Converter,” Journal of Fuzzy Systems and Control, vol. 2, no. 3, pp. 147-159, 2024, https://doi.org/10.59247/jfsc.v2i3.239.
M. Kiew-ong-art, P. Chotikunnan, Y. Pititheeraphab, R. Chotikunnan, K. Roongprasert, and M. Sangworasil, “Comparative Performance of Mamdani and Sugeno Fuzzy Logic Control Systems in Governing the Motion of a Robotic Arm,” International Journal of Membrane Science and Technology, vol. 10, no. 2, pp. 3245-3258, 2023, https://doi.org/10.15379/ijmst.v10i3.3395.
N.-T.-S. Nguyen, Q.-H. Dang, D.-K. Nguyen, D.-Q. Lam, V.-H.-N. Nguyen, N.-P.-T. Le, N.-K. Tran, V.-T.-H. Bui, T.-H. Nguyen, and T. Le, “An Application of STM32F4-Embedded ANFIS-Fuzzy Controller for Tower Crane,” Journal of Fuzzy Systems and Control, vol. 2, no. 3, pp. 189-196, 2024, https://doi.org/10.59247/jfsc.v2i3.260.
C. Guo, L. Zhong, J. Zhao, G. Gao, and Y. Huang, “First-order and high-order repetitive control for single-phase grid-connected inverter,” Complexity, vol. 2020, 2020, https://doi.org/10.1155/2020/1094386.
X. Wang and J. Wang, “Iterative learning control for one-sided lipschitz nonlinear singular conformable differential equations,” International Journal of Robust and Nonlinear Control, vol. 30, no. 17, pp. 7791-7805, 2020, https://doi.org/10.1002/rnc.5191.
R. Chotikunnan, P. Chotikunnan, Y. Pititheeraphab, and P. Minyong, “Time-Varying Sign Gain with Expert System in Serial Iterative Learning Control Architecture,” International Review of Automatic Control (IREACO), vol. 17, no. 1, pp. 1-12, 2024, https://doi.org/10.15866/ireaco.v17i1.24739.
P. Chotikunnan, R. Chotikunnan, and P. Minyong, “Adaptive Parallel Iterative Learning Control with a Time-Varying Sign Gain Approach Empowered by Expert System,” Journal of Robotics and Control (JRC), vol. 5, no. 1, pp. 72-81, 2024, https://doi.org/10.18196/jrc.v5i1.20890.
Y. L. Chuang, M. Herrera, and A. Balal, “Using PV Fuzzy Tracking Algorithm to Charge Electric Vehicles,” International Journal of Robotics and Control Systems, vol. 2, no. 2, pp. 253-261, 2022, https://doi.org/10.31763/ijrcs.v2i2.636.
A. Bounemeur and M. Chemachema, “Adaptive fuzzy fault-tolerant control for a class of nonlinear systems under actuator faults: application to an inverted pendulum,” International Journal of Robotics and Control Systems, vol. 1, no. 2, pp. 102-115, 2021, https://doi.org/10.31763/ijrcs.v1i2.306.
H. Abdelfattah, S. A. Kotb, M. Esmail, and M. I. Mosaad, “Adaptive Neuro-Fuzzy Self Tuned-PID Controller for Stabilization of Core Power in a Pressurized Water Reactor,” International Journal of Robotics and Control Systems, vol. 3, no. 1, pp. 1-18, 2023, https://doi.org/10.31763/ijrcs.v3i1.710.
R. Chotikunnan, P. Chotikunnan, A. Ma'arif, N. Thongpance, Y. Pititheeraphab, and A. Srisiriwat, “Ball and Beam Control: Evaluating Type-1 and Interval Type-2 Fuzzy Techniques with Root Locus Optimization,” International Journal of Robotics and Control Systems, vol. 3, no. 2, pp. 286-303, 2023, https://doi.org/10.31763/ijrcs.v3i2.997.
A. K. Singholi and D. Agarwal, “Review of Expert System and its Application in Robotics,” in Intelligent Communication, Control and Devices: Proceedings of ICICCD 2017, pp. 1253-1265, 2018, https://doi.org/10.1007/978-981-10-5903-2_131.
O. Varlamov, “Brains” for Robots: Application of the Mivar Expert Systems for Implementation of Autonomous Intelligent Robots,” Big Data Research, vol. 25, p. 100241, 2021, DOI: 10.1016/j.bdr.2021.100241.
Z. Jing, “Application and Study of Expert PID Intelligent Control,” IOP Conference Series: Materials Science and Engineering, vol. 563, no. 4, p. 042084, 2019, https://doi.org/10.1088/1757-899X/563/4/042084.
A. Anand, E. Mamatha, C.S. Reddy, and M. Prabha, “Design of neural network based expert system for automated lime kiln system,” Journal Européen des Systèmes Automatisés, vol. 52, no. 4, pp. 369-376, 2019, https://doi.org/10.18280/jesa.520406.
M. Tavana and V. Hajipour, “A practical review and taxonomy of fuzzy expert systems: methods and applications,” Benchmarking: An International Journal, vol. 27, no. 1, pp. 81-136, 2020, https://doi.org/10.1108/BIJ-04-2019-0178.
D. Gupta and A.K. Ahlawat, “Taxonomy of GUM and usability prediction using GUM multistage fuzzy expert system,” Int. Arab J. Inf. Technol., vol. 16, no. 3, pp. 357-363, 2019, https://www.iajit.org/paper/2229/.
S. Thaker and V. Nagori, “Analysis of fuzzification process in fuzzy expert system,” in Procedia Computer Science, vol. 132, pp. 1308-1316, 2018, https://doi.org/10.1016/j.procs.2018.05.047.
M.I. Fale, “Dr. Flynxz-A First Aid Mamdani-Sugeno-type fuzzy expert system for differential symptoms-based diagnosis,” Journal of King Saud University-Computer and Information Sciences, vol. 34, no. 4, pp. 1138-1149, 2022, https://doi.org/10.1016/j.jksuci.2020.04.016.
K.H.D. Tang, S.Z.M. Dawal, and E.U. Olugu, “Integrating fuzzy expert system and scoring system for safety performance evaluation of offshore oil and gas platforms in Malaysia,” Journal of Loss Prevention in the Process Industries, vol. 56, pp. 32-45, 2018, https://doi.org/10.1016/j.jlp.2018.08.005.
P. Chotikunnan, B. Panomruttanarug, and P. Manoonpong, “Dual design iterative learning controller for robotic manipulator application,” Journal of Control Engineering and Applied Informatics, vol. 24, no. 3, pp. 76-85, 2022, http://www.ceai.srait.ro/index.php?journal=ceai&page=article&op=view&path%5B%5D=7786&path%5B%5D=0.
P. Chotikunnan and B. Panomruttanarug, “Practical design of a time-varying iterative learning control law using fuzzy logic,” Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 2419-2434, 2022 https://doi.org/10.3233/JIFS-213082.
B. Panomruttanarug, R. W. Longman, and M. Q. Phan, “Steady state frequency response design of finite time iterative learning control,” The Journal of the Astronautical Sciences, vol. 67, no. 2, pp. 571-594, 2020, https://doi.org/10.1007/s40295-019-00198-9.
B. Panomruttanarug, “Position control of robotic manipulator using repetitive control based on inverse frequency response design,” International Journal of Control, Automation and Systems, vol. 18, no. 11, pp. 2830-2841, 2020, https://doi.org/10.1007/s12555-019-0518-2.
P. Chotikunnan and R. Chotikunnan, “Dual design PID controller for robotic manipulator application,” Journal of Robotics and Control (JRC), vol. 4, no. 1, pp. 23-34, 2023, https://doi.org/10.18196/jrc.v4i1.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Phichitphon Chotikunnan, Rawiphon Chotikunnan, Yutthana Pititheeraphab, Tasawan Puttasakul, Anantasak Wongkamhang, Nuntachai Thongpance
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
