Position Control of 3-DOF Experimental Articulated Robot Arm using PID Controller

Authors

  • Dinh-Hieu Vo Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Nam-Chau Le Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Thi-Y-Nhi Nguyen Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Tran-Phuong Huynh Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Nhat-Truong Huynh Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Kim-Huy Tran Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Ba-Chinh Nguyen Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Truong-Giang Do Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Gia-Huy Tran Ho Chi Minh City University of Technology and Education (HCMUTE)
  • Van-Dong-Hai Nguyen Ho Chi Minh City University of Technology and Education (HCMUTE)

DOI:

https://doi.org/10.59247/jfsc.v3i1.291

Keywords:

PID Control, 3-DOF Robot Arm, Manipulator, Arduino

Abstract

In this paper, we are simulating a 3-degrees of freedom (DOF) Articulated Robot Arm, calculating kinematics and building a PID controller for the 3-Dof Articulated Robot Arm. First, the design process of the 3-Dof robot arm model is done on the Solid works platform. Second, the PID control method is used to determine the "error" value which is the between the measured value of the variable parameter and the desired set value. The controller will minimize errors by adjusting the input control value. Finally, a real robot arm was controlled to move following the reference in the plane with the PID controller embedded on the Arduino microcontroller and collected data about the computer.

References

A. J. Vertut and A. Liégeois, “General design criteria for manipulators,” Mechanism and Machine Theory, vol. 16, no. 1, pp. 65-70, 1981, https://doi.org/10.1016/0094-114X(81)90052-5.

N. Nurnuansuwan et al., “A Prototyping of 2-DOF Robot Arm Using Feedback Control System,” 5th International Conference on Control, Automation and Robotics (ICCAR), pp. 368-372, 2019, https://doi.org/10.1109/ICCAR.2019.8813726.

S. M. Mahil and A. Al-Durra, "Modeling analysis and simulation of 2-DOF robotic manipulator," 2016 IEEE 59th International Midwest Symposium on Circuits and Systems (MWSCAS), pp. 1-4, 2016, https://doi.org/10.1109/MWSCAS.2016.7870099.

Ramish, S. B. Hussain and F. Kanwal, "Design of a 3 DoF robotic arm," 2016 Sixth International Conference on Innovative Computing Technology (INTECH), pp. 145-149, 2016, https://doi.org/10.1109/INTECH.2016.7845007.

I. S. Karem, T. A. J. Wahab, and M. J. Yahyh, “Design and implementation for 3-DOF SCARA Robot based PL,” Al-Khwarizmi engineering journal, vol. 13, no. 2, pp. 40-50, 2017, https://doi.org/10.22153/kej.2017.01.002.

V. D. Cong, “Design and development of a cost-efficiency robot arm with plc-based robot controller,” FME Transactions, vol. 52, no. 2, pp. 226-236, 2024, https://doi.org/10.5937/fme2402226C.

W. W. Naing, M. Thanlyin, K. Z. Aung, and A. Thike, “Position control of 3-dof articulated robot arm using pid controller,” International Journal of Science and Engineering Applications, vol. 7, no. 9, pp. 254-260, 2018, https://doi.org/10.7753/IJSEA0709.1001.

Y. A. Badamasi, "The working principle of an Arduino," 2014 11th International Conference on Electronics, Computer and Computation (ICECCO), pp. 1-4, 2014, https://doi.org/10.1109/ICECCO.2014.6997578.

C. Fallaha, M. Saad and H. Kanaan, "Sliding mode control with exponential reaching law applied on a 3 DOF modular robot arm," 2007 European Control Conference (ECC), Kos, Greece, 2007, pp. 4925-4931, 2007, https://doi.org/10.23919/ECC.2007.7068438.

J. Kern, D. Marrero, and C. Urrea, “Fuzzy control strategies development for a 3-DoF robotic manipulator in trajectory tracking,” Processes, vol. 11, no. 12, p. 3267, 2023, https://doi.org/10.3390/pr11123267.

S. Bennett, “The past of PID controllers,” Annual reviews in control, vol. 25, pp. 43-53, 2001, https://doi.org/10.1016/S1367-5788(01)00005-0.

D. E. Seborg, T. F. Edgar, D. A. Mellichamp, and F. J. Doyle III. Process dynamics and control. John Wiley & Sons. 2016. https://books.google.co.id/books?hl=id&lr=&id=ZZVFEAAAQBAJ.

N. Mehta, D. Chauhan, S. Patel, and S. Mistry, “Design of HMI based on PID Control of Temperature,” International Journal of Engineering Research and, vol. 6, p. 05, 2017, https://doi.org/10.17577/IJERTV6IS050074.

F. R. Septiawan, A. R. Al Tahtawi, and S. M. Ilman, “Control of Bidirectional DC-DC Converter with Proportional Integral Derivative,” Journal of Fuzzy Systems and Control, vol. 2, no. 3, pp. 164-169, 2024, https://doi.org/10.59247/jfsc.v2i3.241.

Q. Ariyansyah and A. Ma'arif, “DC motor speed control with proportional integral derivative (PID) control on the prototype of a mini-submarine,” Journal of Fuzzy Systems and Control, vol. 1, no. 1, pp. 18-24, 2023, https://doi.org/10.59247/jfsc.v1i1.26.

S. Bennett, "Nicholas Minorsky and the automatic steering of ships," in IEEE Control Systems Magazine, vol. 4, no. 4, pp. 10-15, 1984, https://doi.org/10.1109/MCS.1984.1104827.

M. Paluszek and S. Thomas. MATLAB machine learning. Apress.2016. https://books.google.co.id/books?hl=id&lr=&id=3kXODQAAQBAJ.

Downloads

Published

2025-03-14

How to Cite

[1]
D.-H. Vo, “Position Control of 3-DOF Experimental Articulated Robot Arm using PID Controller”, J Fuzzy Syst Control, vol. 3, no. 1, pp. 73–80, Mar. 2025.

Most read articles by the same author(s)

<< < 1 2