Characterization of Tensile Strength and Degradation of Polymer Blend Reinforced with Black Carbone

Authors

  • Sanaa A. Hafad University of Technology-Iraq
  • Shemaa A. Hussin University of Technology-Iraq
  • Abdalkalaq F. Hmood University of Technology-Iraq
  • Raghad R. Mahdi University of Technology-Iraq
  • Salam Waley Shneen University of Technology-Iraq

DOI:

https://doi.org/10.59247/jfsc.v2i3.218

Keywords:

Polymer Blends, Extruder, Black Carbon Powder, Tensile Strength, Degradation Rate

Abstract

Samples of polymeric sheets of high-specification polycarbonate, which is characterized by high resistance in its pure form, were prepared and combined with low-density polyethylene sheets, which show low specifications relative to polycarbonate in equal proportions of (PC-%LDPE) (100%,80% 50%,20%). The preparation of the layered polymer mixtures was carried out using the micro-mixing method using an extruder. The effect of the binary polymer blends (PC-%LDPE) was demonstrated in increasing the maximum strength, and the effectiveness of advanced mechanical properties. The degradation of polymeric sets had little effect with the reinforcement of 20% of black carbon powder compared to other ratios.

References

F. H. Mark. Encyclopedia of polymer science and technology, concise. John Wiley & Sons. 2013. https://books.google.co.id/books?hl=id&lr=&id=Vfh1AQAAQBAJ.

L. A. Utracki. Commercial polymer blends. Springer Science & Business Media. 2013. https://books.google.co.id/books?hl=id&lr=&id=bYvkBwAAQBAJ.

Khan, I., Mansha, M., & Jafar Mazumder, M. A. (2019). Polymer blends. In Functional polymers (pp. 513-549, 2019, https://doi.org/10.1007/978-3-319-95987-0_16.

M. Rothammer, P. Strobel, C. Zollfrank, and C. Urmann, “Biocompatible coatings based on photo-crosslinkable cellulose derivatives,” International Journal of Biological Macromolecules, vol. 250, p. 126063, 2023, https://doi.org/10.1016/j.ijbiomac.2023.126063.

S. I. Salih, A. Algabban, and A. Abdalsalam. "Preparation and characterization of PMMA-HDPE and HDPE-PMMA binary polymer blends." Engineering and Technology Journal, vol. 35 (4 Part A), pp.311-317, 2017, https://doi.org/10.30684/etj.35.4A.2.

A. Gadelmoula and S. A. Aldahash, “Effect of Reinforcement with Short Carbon Fibers on the Friction and Wear Resistance of Additively Manufactured PA12,” Polymers, vol. 15, no. 15, p. 3187, 2023, https://doi.org/10.3390/polym15153187.

A. A. Al-Muntaser et al., “MoO3 nanoplates reinforced the structural, electrical, mechanical, and antibacterial characteristics of polyvinyl pyrrolidone/sodium alginate polymer blend for optoelectronics and biological applications,” International Journal of Biological Macromolecules, vol. 254, pp. 127894, 2024, https://doi.org/10.1016/j.ijbiomac.2023.127894.

M. S. Waheed and S. A. Hafad, “Study of tensile strength and compression strength of binary polymeric blends (High Density poly ethylene/polycarbonate),” Eng.&Tech, vol. 26, no. 7, 2008, https://doi.org/10.30684/etj.26.7.7.

O. H. Sabr, N. H. Al-Mutairi and A. Y. Layla, “Characteristic of low-density polyethylene reinforcement with nano/micro particles of carbon black: a comparative study,” Archives of Materials Science and Engineering, vol. 110, no. 2, 2021, https://doi.org/10.5604/01.3001.0015.4312.

R. Xu, C. Wu, and H. Xu, “Particle size and zeta potential of carbon black in liquid media,” Carbon, vol. 45, no. 14, pp. 2806-2809, 2007, https://doi.org/10.1016/j.carbon.2007.09.010.

R. J. Crawford and P. J. Martin. Plastics engineering. Butterworth-Heinemann. 2020. https://books.google.co.id/books?hl=id&lr=&id=aci2DwAAQBAJ.

T. Bensing and M. Moneke, “Development of a novel testing concept for combined characterisation of tensile and compressive properties,” International Journal of Mechanics and Materials in Design, pp. 1-13, 2024, https://doi.org/10.1007/s10999-023-09703-3.

S. A. H. Hafad and F. H. Rashed, “Durability Characteristics of Concrete and Reinforcing Bars Exposed to Harsh Environments,” Eng. &Tech. Journal, vol. 32, 2014, https://doi.org/10.30684/etj.32.5B.9.

F. P. La Mantia, M. Morreale, L. Botta, M. C. Mistretta, M. Ceraulo, and R. Scaffaro, “Degradation of polymer blends: A brief review,” Polymer Degradation and Stability, vol. 145, pp. 79-92, 2017, https://doi.org/10.1016/j.polymdegradstab.2017.07.011.

A. I. Bika, M. Safitri, E. Loniza, B. R. Yusuf, and D. Sukwono, “Use of Vacuum to Increase the Effectiveness of X-Ray Tube Maintenance,” Journal of Fuzzy Systems and Control, vol. 1, no. 3, pp. 66-70, 2023, https://doi.org/10.59247/jfsc.v1i3.33.

F. N. Abdullah, G. A. Aziz, and S. W. Shneen, “GWO-PID of Two-Phase Hybrid Stepping Motor for Robotic Grinding Force,” Journal of Fuzzy Systems and Control, vol. 1, no. 3, pp. 71-79, 2023, https://doi.org/10.59247/jfsc.v1i3.91.

H. Maghfiroh, “Rotary Inverted Pendulum Control with Pole Placement,” Journal of Fuzzy Systems and Control, vol. 1, no. 3, pp. 90-96, 2023, https://doi.org/10.59247/jfsc.v1i3.152.

S. A. Aessa, E. H. Ali, S. W. Shneen, and L. H. Abood, “Adaptive Fuzzy Filter Technique for Mixed Noise Removing from Sonar Images Underwater,” Journal of Fuzzy Systems and Control, vol. 2, no. 2, pp. 45-49, 2024, https://doi.org/10.59247/jfsc.v2i2.176.

T. V. Ho et al., “PID Control for Balancing Bike Model using Reaction Wheel,” Journal of Fuzzy Systems and Control, vol. 2, no. 2, pp. 50-57, 2024, https://doi.org/10.59247/jfsc.v2i2.188.

S. H. Omran, S. W. Shneen, and M. M. AL-Khafaji, “Beta-Deficient Estimators with Truncated Sampling Plan in Quality Control for the Auto Battery Industry,” Journal of Fuzzy Systems and Control, vol. 2, no. 2, pp. 81-86, 2024, https://doi.org/10.59247/jfsc.v2i2.181.

Downloads

Published

2024-09-10

How to Cite

[1]
S. A. Hafad, S. A. Hussin, A. F. Hmood, R. R. Mahdi, and S. W. Shneen, “Characterization of Tensile Strength and Degradation of Polymer Blend Reinforced with Black Carbone”, JFSC, vol. 2, no. 3, pp. 160–163, Sep. 2024.

Issue

Section

Articles

Most read articles by the same author(s)